I would need three columns of tree cubes stacked on top of each other, so I experimented to find out how to stabilise three cubes. Four struts of each cube connect top and bottom vertically, and come very close with simple stacking. I decided to have four central struts, and complete them in the pattern of three stacked cube models.
|Bell Tower early draft|
Finally, I was getting more stability and balance, and I began marvelling how to finalise the now sturdy base in a satisfying way. I could easily stack my two cube model over the base, and have an octahedron to top it off.
|Bell Tower last draft|
I achieved the final bit of stabilisation by suspending a bell from the four central struts, bringing the centre of gravity down, and dampening lateral movements. I had all aspects together I wanted for that sculpture: a lean base with four central struts, a pointy roof, and a suspended weight. The devil hid in the detail. A cube combined with half of an octahedron can be build with 12 struts, using four joined corners, instead of simply wedging an 8 strut half octahedron on top of a 12 strut cube. Also, the bell had the right kind of weight, but not the looks I wanted.
|Bell Tower nearly finished|
I spend the first day on building the base structure, the second day with finding a top and suspension, as well as cleaning up the model and fine-tuning. On the third day, it was time to bring everything together.
Once the bell was in place, the model stood easily balanced, and I installed the last struts without bothering about the wobbly base to work with. The top can now be bend, and the weight of the bell prevents the model from falling over on the rebound. Once in motion, top, base and bell swing in different, connected rhythms, with pressure from the top it rather bends away instead of collapsing.
Even while blogging, I couldn't stop tinkering. The finishing touches included a cross-bracing of the central struts, similar to the sides, and a tip made with red struts, rotating opposite to the smaller half octahedron underneath. I like the distinct shapes emerging from the red struts from a distance, as well as the sturdiness with all sides cross-braced.
I used four oak struts (60cm) and 44 bamboo struts with three different length (24 @ 20cm, 16 @ 16cm, 4 @ 28 cm), three types of elastic cord totalling about 12 metres in length, and about 6 metres of nylon cord. Bell Tower measures 90 cm, with a base of 20 x 20 cm, encapsulating a volume of about 35 litres with an estimated weight of about 300 grams. There's roughly at 2:3 ratio in the added length of struts and tendons.